Our Professionals will scan/clean/clear your premise with the following equipment and more...
We would like to thank Research Electronics International for the highest quality Counter Measures equipment in the world...
  NJE-4000 | ORION Non-Linear Junction Evaluator NLJD

ORION (The Great Hunter) provides the capability to detect hidden electronic devices, regardless of whether the device is radiating, hard wired, or even turned on at all! ORION is the latest advancement in Non-linear Junction Detection and evaluation for Countersurveillance.

 

  OSC-5000 | Oscor 5000E

When protecting sensitive information is critical to your success, the OSCOR provides the most reliable and cost effective capability in the industry, including detection of sophisticated transmitters (frequency-hopping, burst/packet, and spread spectrum). OSCOR is a complete eavesdropping detection package that is portable and programmable. 

  MDC-2100 | Microwave Down Converter

Research Electronics International is proud to introduce a new upgrade to the OSCOR 5000. With the new MDC-2100, the OSCOR has the ability to search for illegal surveillance devices from 10KHz to 21GHz. 

  OPC-5000E | OPC 5.0 PC Interface

OverView
Version 5.0 of the OSCOR firmware has been designated as the OSCOR 5000 “E” (Enhanced) and brings significant updates including a high-speed USB port for PC connection, faster spectrum analyzer sweeping speed, a backlit display, and improved functionality.

The OPC 5.0 software combined with the USB port provides the ability to store and compare multiple Peak Traces from previous sweeps, adjacent rooms, and real-time OSCOR data. This high resolution data is easily manipulated for analysis.

 

  CPM-700 | Countersurveillance Probe/Monitor

The CPM-700 is a broadband receiver designed to detect and locate all major types of electronic surveillance devices including room, phone, body bugs, video transmitters, and tape recorders.  

  CMA-100 | Countermeasures Amplifier

The Countermeasures Amplifier (CMA-100) is a high gain audio amplifier used to detect and identify certain types of surveillance devices attached to building wiring such as telephone wiring, LAN and server systems, AC Power, Alarm wire etc. 

  Borescopes | Precision Borescopes
NEW!

Research Electronics International is proud to offer this interchangeable borescope kit. Each Product can be purchased individually for a specific use, or can be purchased as a kit to cover a wide array of situations. 

  LAA-1530 | Log Active Antenna (1.5-3.0 GHz)

The Log-Periodic Active Antenna is a high gain active antenna designed to dramatically increase the receiving range for signals between 1.5 and 3.0 GHz. 

  NGA-5000 | Noise Generator for OPC

NGA-5000 is a noise generation and audio amplifier that is required to perform the advanced audio correlation process. 

  OIF-5000 | IF Output (10.7 MHz)

The Intermediate Frequency Output provides an IF output of 10.7 MHz for detailed signal analysis.  

  PNG-200 | Portable Noise Generator

The PNG-2000 is designed as a portable acoustic noise-generating unit that can be used in a variety of ways. The noise generating circuitry has been optimized for voiceband noise masking against listening devices and is designed to reduce the effectiveness of eavesdropping devices such as microphones and tape recorders. 

  EAR-200 | Electro Acoustic Receiver
DISCONTINUED

Used to locate sources of acoustic leakage, the EAR allows "before and after" comparisons to determine the effectiveness of the noise masking, and connects easily to recorders, spectrum analyzers, or other test equipment for more detailed analysis.

The EAR-200 is intended for training and test purposes only, and is not to be used in a surreptitious manner.

 

  MLP-700 | CPM Magnetic Leakage Probe

MLP-700 enables the operator to detect and locate magnetic recording devices such as audio or video tape recorders. 

  IRP-700 | CPM Infrared Probe

IRP-700 Infrared Probe enables the operator to detect and locate surveillance devices that utilize infrared energy as the transmitting medium. 

  ALP-700 | CPM Acoustic Leakage Probe

With the Acoustic Leakage Probe, the operator can determine the vulnerability of accoustic leakage by placing the ALP-700 against structural objects such as walls or windows.  

  MPA-700 | Modular Phone Adaptor

MPA-700 Modular Phone Adapter gives the CPM the ability to test a location's phone wiring for surveillance devices. 

  ASA-2000 | Audio Spectrum Analyzer

The purpose of the Audio Spectrum Analysis software is to provide the capability to measure the audio being absorbed by environmental structures and then analyze and adjust the noise masking levels for an effective countermeasure without being too loud and/or disruptive.

 

  BMP-1200 | CPM Broadband Microwave Probe

Broadband Microwave Probe (BMP-1200) extends the range of the CPM-700 to 12GHz for detection of modern higher frequency eavesdropping devices. The BMP-1200 is sold as a CPM-700 Deluxe Upgrade which includes an Acoustic Leakage Probe for testing acoustic vulnerabilities, an RF Sniffer Probe for better detection in RF rich environments, and a briefcase size hard-shell carrying case better suited for traveling for the CPM-700 and accessories

 

  UVL-200A | UltraViolet Inspection Light

UVL-200A Ultraviolet Light is used in the physical search of a location. The UVP-100 is used to mark objects (i.e. screws, wall fixtures) in order to check for a breach at a later date.